10
3
BATTERYPACKS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
DBattery case— optional for some versions
When using a BP-226
BATTERY CASE
attached to the trans-
ceiver, install 5 AA(LR6) size alkaline batteries as illustrated
at right.
qHook your finger under the latch, and open the cover in the
direction of the arrow (q). (Fig.1)
wThen, install 5 ×AA (LR6) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
eClose the cover with fitting in the direction of the arrow (w)
first, then firm the latch in place (e). (Fig.1)
• Be sure to the gasket and the ribbon are set correctly,
and do not protrude out of the battery case. (Fig.3)
RCAUTION!
•When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new and
old batteries together.
•Keep battery contacts clean. It’s a good idea to clean bat-
tery terminals once a week.
q
we
BP-226 Latch
Fig.1
Fig.2
Ribbon
Fig.3
Gasket
Ribbon