29
6MEMORY/CALL OPERATION
DMemory/call ➾memory/call
qSelect the memory (call) chan-
nel to be transferred:
➥Push [MR] (or [CALL]) to se-
lect the memory (call chan-
nel) mode.
➥Push [YY]or [ZZ]to select the
memory channel.
• When [VOL] is assigned as
tuning dial, rotate [VOL] to se-
lect the memory channel. (pgs.
18, 53)
wPush [FUNC], then push [MR]
momentarily.
•“--” and “X” blink.
ePush [YY]or [ZZ]to select the target memory.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the target channel. (pgs. 18, 53)
rPush [FUNC], then push and hold [MR] for 1 sec.
•Memory mode is selected and the contents are transferred to the
target memory.
DClearing a memory
qPush [CLR] to select VFO mode, if necessary.
wPush [FUNC], then push [MR] to enter the memory trans-
fer mode.
•“
X” and a memory channel
number blink.
ePush [YY]or [ZZ]to select the
memory channel to be cleared.
• When [VOL] is assigned as tun-
ing dial, rotate [VOL] to select the
memory channel. (pgs. 18, 53)
•The call channel cannot be
cleared.
rPerform the following operation
within 1 sec, otherwise the
transceiver returns to the mem-
ory mode without clearing the
memory.
- Push [FUNC], then push [MR] momentarily.
- Push [FUNC], then push and hold [MR] for 1 sec.
•The contents of the selected memory are cleared.
tPush [CLR] to return to regular operation.
DUP SCAN
PRIO
SET
H/M/L
OPT
SKIP
BANK
TONE
T.SCAN
P.BEEP
ABD
C
CALL
ENT
MR CLRFUNC
PWR
9
8
7
4
123
560
[VOL]
A
FUNC
B
CALL
C
MR
DUP SCAN
PRIO
SET
H/M/L
OPT
SKIP
BANK
TONE
T.SCAN
P.BEEP
ABD
C
CALL
ENT
MR CLRFUNC
PWR
9
8
7
4
123
560
A
FUNC
C
MR