Ear Clip Headset w/ Bluetooth wireless technology | V10M10_IM_EN_11082006 |
OPERATING INSTRUCTIONS
How to Wear the i212 Ear Clip Headphones
The i212 stereo ear clip headphones are designed for a comfortable fit on the ears. The ear clip with the
1.Holding the ear clip in one hand, use one finger to push the ear rest out to extend it.
2.Place the ear clip over your ear and release the ear rest.
3. Each ear clip headphone should fit tightly, comfortably and securely on your ears
Listening to Music
Once you have paired the i212 with either an audio device which supports Bluetooth wireless technology, you can enjoy listening to music wirelessly.
•For a direct connection with an audio device that supports Bluetooth wireless technology.
a.Pair the i212 with the audio device as instructed in the section, “Pairing i212 with your Mobile Phone or Audio Device” if you have not done so already.
b.Switch both the i212 and the audio device ON. (Note: The i212 is designed to maintain pairing settings even when one or both devices are switched off. However, this feature only functions when the paired audio device is designed with the same feature. If the paired audio device does not support this function, it may need to be paired again once it has been switched off and switched back on. Please refer to the owner’s manual for the audio device to determine if it has this feature.)
c.Start playing music using the controls on the device to listen to music on the i212. (Note: If the device supports a platform which allows playback functions to be controlled from the headset, you can operate these functions directly through the i212. If not, only the volume can be controlled through the headset.)
- 11 - |