Infinity TSS-800 S UBWOOFER C

Werecommend that you do not operate your speakers or

subwoofer with the bass,treble and loudness controls set to

full boost.This will place undue strain on your electronics and

speakersand could damage them.

The volume control setting on your processor/preamp or receiver

is not a specific indication of the overall loudness level of the

speakers.The only important consideration is the loudness level at

which the system can be played,regardless of where the volume

control is set.

Always turn down the volume control setting on your processor/

preamp or receiver when changing sources,or switching inputs to

AM or FM operation.Excessively loud transients (clicks or popping

sounds) can damage the satellite speakers and possibly the

subwoofer.

Important!

Whenever changing cables,pulling plugs,etc., ALWAYS TURN OFF

ALL EQUIPMENT,including the subwoofer.

SUBWOOFER CONTROLS

Rear Panel 1Subwoofer-Level Control

2Crossover-Frequency Adjustment

3Phase Switch

4LFE Input

5Line-Level Inputs

6Power Indicator LED

7Power Switch

TSS-800 (120V) OM 2/24/06 10:01 AM Page 10