IN134UST/IN136UST User’s Manual

Installation II Menu

Press the MENU button to open the OSD menu. Press the ◄► buttons to move to the Installation II

menu. Press the ▲▼ buttons to move up and down in the Installation II menu.

ITEM DESCRIPTION

Auto Source Press the ◄► buttons to enable or disable automatic source detection.
Auto Power Off
(min.)
Press the ◄► buttons to enable or disable automatic shutdown of lamp when there is
no signal.
Auto Power On Press the ◄► buttons to enable or disable automatic power On when AC power is
supplied.
Fan Speed
Press the ◄► buttons to toggle between Normal and High fan speeds.
Note: It is recommended that the Fan Speed be set to high speed when the altitude of
the environment is higher than 1500m (4021 ft).
Lamp Mode Press the ◄► buttons to select the lamp mode for higher brightness or lower
brightness to save lamp life.
Advanced Press (Enter) / ► to enter the Advanced menu. See Advanced Feature on page
30.
Factory Reset Press (Enter) / ► to reset all items to factory preset values.
Status Press (Enter) / ► to enter the Status menu. See page 38 for more information on
Status.

– 29 –