E2010 CCN15214133
(800)276-4658 DFAX (800) 266-7016
INGERSOLL RAND COMPANYLTD
209NORTH MAIN STREET -- BRYAN,OHIO 43506

1” DIAPHRAGM PUMP

OPERATOR’S MANUAL PE10X -X-X-A0 S
RELEASED: 9-15-04
REVISED: 11-13-10
(REV.06)
INCLUDING: OPERATION,INSTALLATION & MAINTENANCE

1:1 RATIO(METALLIC)

READ THIS MANUAL CAREFULLYBEFORE INSTALLING,

OPERATINGOR SERVICING THIS EQUIPMENT.

Itis the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Referto Model Description Chart to match the pump material options.
637401-XXfor fluid section repair (see page 4). NOTE: This kit also con-
tainsseveral air motor seals which will need to be replaced.
637412for air section repair (see page 6).

PUMP DATA

Models seeModel Description Chart for “-XXX”..............
PumpType MetallicAir Operated Double Diaphragm..........
Material seeModel Description Chart..............
Weight PE10R-XAX-XXX-A0S 17.87 lbs (8.11 kgs)... ...
PE10R-XCX-XXX-A0S 34.77 lbs (15.77 kgs)...
PE10R-XHX-XXX-A0S 39.17 lbs (17.77 kgs)...
PE10R-XSX-XXX-A0S 37.77 lbs (17.13 kgs)...
add5.26 lbs (2.39 kg) for Aluminum air motor section
add11.43 lbs (5.18 kg) for Stainless Steel air motor section
MaximumAir Inlet Pressure 120p.s.i.g. (8.3 bar).........
MaximumMaterial Inlet Pressure 10p.s.i.g. (0.69 bar).....
MaximumOutlet Pressure 120p.s.i.g. (8.3 bar)..........
MaximumFlow Rate (flooded inlet)52.2 g.p.m. (197.6 l.p.m.)....
Displacement/ Cycle @ 100 p.s.i.g. 0.232gal. (0.88 lit.)...
MaximumParticle Size 1/8”dia. (3.3 mm)............
MaximumTemperature Limits (diaphragm / ball / seal material)
E.P.R./ EPDM -60_to280_F(-51_to138_C)...........
HytrelR-20_to150_F(-29_to66_C)...............
Nitrile 10_to180_F(-12_to82_C).................
Polypropylene 35_to175_F(2_to79_C)...........
SantopreneR-40_to225_F(-40_to107_C)...........
PTFE 40_to225_F(4_to107_C).................
VitonR-40_to350_F(-40_to177_C)................
DimensionalData seepage 8................
MountingDimension 4”x6.25” (101.6 mm x 158.8 mm)........
NoiseLevel @ 70 p.s.i., 60 c.p.m. 80.6 db(A){.....
Thepump sound pressure levels published here have been updated to an Equivalent
ContinuousSound Level (LAeq) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROPS5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however,certain
combinationsmay not be recommended, consult a representative or the
factoryif you have questions concerning availability.
Figure1

MODEL DESCRIPTION CHART

PE10X -X X X -X X X -A0S
PE10X- XXX - X X X-A0S
637401- X X
DiaphragmBall
FLUIDSECTION SERVICE KIT SELECTION
EXAMPLE:Model # PE10A-ASP-AAA-A0S
FluidSection Service Kit # 637401-AA
SeatMaterial
A -Santoprene G - Nitrile
C -Hytrel H -Hard 440 Stainless Steel
E -Carbon Steel L -Hastelloy - C
F -Aluminum S -316 Stainles s Steel
DiaphragmMaterial
A -Santoprene M - Medical Grade Santoprene
C -Hytrel T - / Santoprene
G - Nitrile V -Viton
HardwareMaterial
P -Plated Steel
S -Stainless Steel
FluidCaps & Manifold Material
A -Aluminum H -Hastelloy - C
C -CastIron S -Stainless Steel
FluidConnection
A -1 - 1 1-1/ 2 N.P. T.F. - 1
B -1 - 11BSP
CenterSection Material
A -Aluminum
R -Polypropylene
S -Stainless Steel
BallMaterial
A -Santoprene S -316 Stainless Steel
C -Hytrel T -PTFE
G - Nitrile V -Viton
www.ingersollrandproducts.com