E2010 CCN15197213
(800)495-0276DFAX (800) 892-6276
INGERSOLL RAND COMPANYLTD
209NORTH MAIN STREET -- BRYAN,OHIO 43506

1-1/2” DIAPHRAGM PUMP

OPERATOR’S MANUAL PD15X-XXX-XXX
RELEASED: 8-7-0 3
REVISED: 5-12-10
(REV. 16)
INCLUDING: OPERATION,INSTALLATION & MAINTENANCE

1:1 RATIO(METALLIC)

READ THIS MANUAL CAREFULLYBEFORE INSTALLING,

OPERATINGOR SERVICING THIS EQUIPMENT.

Itis the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

PE15X-XXX-XXX

SERVICE KITS

Referto Model Description Chart to match the pump material options.
637389for air section repair (see page 6).
637375-XXfor fluid section repair (see page 4). NOTE: This kit also con-
tainsseveral air motor seals which will need to be replaced.
637390-Xmajor air valve assembly (see page 7).

PUMP DATA

Models seeModel Description Chart for “-XXX”..............
PumpType MetallicAir Operated Double Diaphragm..........
Material seeModel Description Chart..............
Weight PX15R-XAX-XXX 37.65lbs (17.08 kgs)... .......
PX15R-XCX-XXX 73.2lbs (33.2 kgs)......
PX15R-XHX-XXX 86.9lbs (39.4 kgs)......
PX15R-XSX-XXX 61.2lbs (27.8 kgs).......
add2.14 lbs (0.97 kg) for aluminum air motor section
add18.14 lbs (8.23 kg) for stainless steel air motor s ection
MaximumAir Inlet Pressure 120p.s.i.g. (8.3 bar).........
MaximumMaterial Inlet Pressure 10p.s.i.g. (0.69 bar).....
MaximumOutlet Pressure 120p.s.i.g. (8.3 bar)..........
MaximumFlow Rate (flooded inlet)123 g.p.m. (465.6 l.p.m.)....
Displacement/ Cycle @ 100 p.s.i.g. 0.617gal. (2.34 lit.)...
MaximumParticle Size 1/4”dia. (6.4 mm)............
MaximumTemperature Limits (diaphragm / ball / seal material)
E.P.R./ EPDM -60_to280_F(-51_to138_C)...........
HytrelR-20_to150_F(-29_to66_C)...............
Nitrile 10_to180_F(-12_to82_C).................
Polypropylene 35_to175_F(2_to79_C)...........
SantopreneR-40_to225_F(-40_to107_C)...........
PTFE 40_to225_F(4_to107_C).................
VitonR-40_to350_F(-40_to177_C)................
DimensionalData seepage 8................
MountingDimension 9” x 11.75” (228.6 mm x 298.5 mm).......
NoiseLevel @ 70 p.s.i., 60 c.p.m. 82.8 db(A){.....
Thepump sound pressure levels published here have been updatedto an Equivalent
ContinuousSound Level (LAeq) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROPS5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however,certain
combinationsmay not be recommended, consult a representative or the
factoryif you have questions concerning availability.

MODEL DESCRIPTION CHART

PX15 X -X X X -X X X
PX15X- XXX - X X X
637375- X X
DiaphragmBall
FLUIDSECTION SERVICE KIT SELECTION
EXAMPLE:Model # PD15A-ASP-SAA
FluidSection Service Kit # 637375-AA
SeatMaterial
A - Santoprene G - Nitrile
C -Hytrel H -Hard 440 Stainless Steel
E - Carbon Steel L -Hastelloy - C
F - Aluminum S - 316 Stainless Steel
DiaphragmMaterial
A - Santoprene M - Medical Grade Santoprene
C -Hytrel V - Viton
G -Nitrile T - PTFE / Santoprene
HardwareMaterial
P - Plated Steel S - Stainless Steel
FluidCaps & Manifold Material
A - Aluminum H -Hastelloy - C
C -Cast Iron S - Stainless Steel
FluidConnection
A - 1- 1/2 - 11 -1/ 2 N.P. T.F.
B - Rp 1-1/2 (1-1/2 - 11BSP, parallel)
Y - 1-1/2” A.N.S.I. / DIN Flange
CenterSection Material
A - Aluminum
R -Polypropylene
S - Stainless Steel
BallMaterial
A - Santoprene S - 316 Stainless Steel
C -Hytrel T -PTFE
G -Nitrile V -Viton
ElectronicInterface
D -None E - Available
www.ingersollrandproducts.com
Figure 1