E2010 CCN15207962
(800)276-4658 DFAX (800) 266-7016
INGERSOLL RAND COMPANYLTD
209NORTH MAIN STREET BRYAN, OHIO 43506
1” DIAPHRAGM PUMP
OPERATOR’S MANUAL PW10A -X-XRELEASED: 3-11-04
REVISED: 5-19-10
(REV.05)
INCLUDING: OPERATION,INSTALLATION & MAINTENANCE
1:1 RATIO(METALLIC)
READ THIS MANUAL CAREFULLYBEFORE INSTALLING,
OPERATINGO RSERVICING THIS EQUIPMENT.
Itis the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Referto Model Description Chart to match the pump material options.
637397for air section repair (see page 6).
637401-XXfor fluid section repair (see page 4). NOTE: This kit also con-
tainsseveral air motor seals which will need to be replaced.
637390-3major air valve assembly (see page 7).
PUMP DATA
Models seeModel Description Chart for “-XXX”..............
PumpType MetallicAir Operated Double Diaphragm..........
Material seeModel Description Chart..............
Weight 26.2lbs (11.9 kgs).........................
MaximumAir Inlet Pressure 120p.s.i.g. (8.3 bar).........
MaximumMaterial Inlet Pressure 10p.s.i.g. (0.69 bar).....
MaximumOutlet Pressure 120p.s.i.g. (8.3 bar)..........
MaximumFlow Rate (flooded inlet)60.0 g.p.m. (227.1 l.p.m.)....
Displacement/ Cycle @ 100 p.s.i.g. 0.234gal. (0.89 lit.)...
MaximumParticle Size 1/8”dia. (3.3 mm)............
MaximumTemperature Limits (diaphragm / ball / seal material)
E.P.R./ EPDM -60_to280_F(-51_to138_C)...........
HytrelR-20_to150_F(-29_to66_C)...............
Nitrile 10_to180_F(-12_to82_C).................
SantopreneR-40_to225_F(-40_to107_C)...........
PTFE 40_to225_F(4_to107_C).................
VitonR-40_to350_F(-40_to177_C)................
DimensionalData seepage 8................
MountingDimension 5.9375” x 8.75” (150.8 mm x 222.3 mm)....
NoiseLevel @ 70 p.s.i., 60 c.p.m. 80.6 db(A){.....
Thepump sound pressure levelspublished here have been updated to an Equivalent
ContinuousSound Level (LAeq) to meet the intent of ANSI S1.13-1971,CAGI-PNEU-
ROPS5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however,certain
combinationsmay not be recommended, consult a representative or the
factoryif you have questions concerning availability.
Figure1
MODEL DESCRIPTION CHART
PW10 A -A A X -X X X
PW10A- AAX - X X X
637401- X X
DiaphragmBall
FLUIDSECTION SERVICE KIT SELECTION
EXAMPLE:MODEL # PW10A-AAP-AAA
FLUIDSECTION SERVICE KIT # 637401-AA
SEATMATERIAL
A -Santoprene F -Aluminum
C -Hytrel G - Nitrile
DIAPHRAGMMATERIAL
A -Santoprene T -PTFE / Santoprene
C -Hytrel V - Viton
G - Nitrile
HARDWAREMATERIAL
P -Plated Steel
S -Stainless Steel
FLUIDCAPS & MANIFOLD MATERIAL
A -Aluminum
FLUIDCONNECTION
A -Inlet -1-1/2 -- 11-1/2 N.P.T.F.-1
Outlet - 1-1/4 -- 11-1/2N.P.T.F.- 1
CENTERSECTION MATERIAL
A -Aluminum
BALLMATERIAL
A -Santoprene T - PTFE
C -Hytrel V - Viton
G - Nitrile
www.ingersollrandproducts.com