51
NS-40D510MX15 Insignia 40" LED TV
www.insigniaproducts.com

Selecting the audio out mode

If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1Connect headphones, a home theater system,
sound bar, or external speaker system to the
/AUDIOOUT jack on the side of your TV. The
following screen opens.
2Press W or X to highlight the audio out mode
you want to use, then press ENTER. You can
select:
•Headphones/Audio Out Variable—Select
this option to use the remote control tha t
came with your TV to control the audio from
headphones, a home theater system, or a
sound bar you connected to the
/AUDIOOUT jack.
•Audio Out Fixed— Select this option to use
the remote control that came with the home
theater system or sound bar you connected to
the /AUDIO OUT jack to control the audio.

Playing TV audio only

You can turn off the picture on your TV and listen to
the program audio only.
1Press MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3Press S or T to highlight Audio Only, then
press ENTER.
4Press S or T to select On.
5Press MENU to return to the previous menu, or
press EXIT to close the menu.
Changing channel settings

Automatically scanning for chann els

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH or CH , your TV goes to the nex t or
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
1Press MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3Press S or T to highlight Auto Channel Search,
then press ENTER. The CHANNELS· AUTO
CHANNEL SEARCH screen opens.
4Press S or T to highlight Antenna, Cable
Service, or Satellite Service, then press ENTER.
Notes
• The picture turns off in about five
seconds.
•Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.