40
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
www.insigniaproducts.com

Setting the power on picture mode

You can set the picture mode your TV uses when
you turn it on.
To set the power on picture mode:
1Press MENU. The on-screen menu opens.
2Press W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3Press S or T to highlight Reset to Default, then
press ENTER. The SETTINGS· RESET TO DEFAULT
menu opens.
4Press S or T to highlight Power on in Vivid
Mode, then press ENTER.
5Press S or T to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off),
then press ENTER.
6Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusti ng the sound

Adjusting sound settings

You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
To adjust sound settings:
1Press MENU. The on-screen menu opens.
2Press W or X to highlight AUDIO, then press T or
ENTER. The AUDIO menu opens.
3Press S or T to highlight an option, then press
ENTER to access the option. You can select:
•Sound Mode—Selects the sound mode. You
can select:
•Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
•Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
•Music—Preserves the original sound. This
setting is good for listening to music.
•News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
•Custom—Lets you manually adjust sound
settings.
•Balance—Adjusts the balance between the
left and right audio channels.
•Bass—Adjusts the low sounds.
•Treble —Adjusts the high sounds.
•TV Speakers—Selects where to play TV audio.
You ca n se lec t On (default setting) to play
audio through the TV speakers or Off to play
audio through the speakers on an external
audio system.
•Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select:
•PCM (to output audio in 2-channel stereo).
•RAW (to pass through the original digital
audio sound).
•Audio Delay—Fine tunes the audio when
it is not in sync with the video.