11
Insignia 19"/22" LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an A/V cable (not provided) to the
AVI N VIDE O jack and L/R AUDIO jacks on the
side of your TV and to the composite video and
audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the Setup Wizard on page 20.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV and
to the coaxial out jack on the cable or satellite
box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the Setup Wizard on page20.
Note
•The AVI N VID EO jack shares th e audio jacks
with the COMPONENT IN video jacks.
• When you connect the audio using the
L/RAUDIO jacks, the audio output is analog.
AUDIO
LR
VIDEO/YPBPRUSB
HDMI 2
(ARC)
HDMI 1
(DVI)
COMPONENT IN
AV IN
Cable or satellite box
A/V cable
Cables are often color-coded
to match color-coded jacks.
Note: The yellow video
connector on the AV cable
connects to the green
AVIN VIDEO jack. Side of TV
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
PC IN
VGA PC/DVI AUDIO
/
AUDIO OUT
DIGITAL
OUTPUT
(COAXIAL)
ANT/
CABLE IN
Cable or satellite box
Coaxial cable
Back of TV
NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 11 Thursday, February 9, 2012 3:19 PM