Menu

Available options

 

 

Music

DISC: Displays the Music (or Audio CD) menu

(See “Audio CD

for a disc.

and Music menu

 

options” on

 

page 14)

 

 

 

Easy Menu

Disc Manager: Displays the Disc Setup menu.

Rec. Mode: Displays the Record Mode setup

 

menu.

 

 

Using the Home Menu

In this menu system there are several ways to customize the settings. Most menus consist of three levels to set up the options, but some require more levels for some settings.

To change settings using the Home menu:

1Press HOME. The Home menu opens.

2Select Setup and Start, then press ENTER. The Setup menu opens with the General Settings icon highlighted.

3Press / to select the option you want, then press to move to the second level.

4Press / to select the second option you want, then press to move to the third level.

5Press / to select the setting you want, then press ENTER to confirm your selection. Some items require additional steps.

6Press RETURN or HOME to exit the Setup menu.

Note

Press to go back to the previous level.

Menu

Available settings

 

 

 

 

General

Clock Set–You can manually set the clock.

Settings

TV Aspect–You can select from 4:3 Letter box,

 

4:3 Pan scan, or 16:9 Wide.

 

Progressive Scan–Set to ON or OFF.

 

• Notes: Progressive Scan Video

 

provides the highest quality pictures

 

with less flickering. If you are using the

 

COMPONENT OUTPUT jacks, but are

 

connecting your recorder to a standard

 

(analog) television, set Progressive

 

Scan to OFF. If you are using the

 

COMPONENT OUTPUT jacks for

 

connection to a TV or monitor that is

 

compatible with a progressive scan

 

signal, set Progressive Scan to ON.

 

• Caution: Once the setting for

 

Progressive Scan output is entered, an

 

image will only be visible on a

 

Progressive Scan compatible TV or

 

monitor. If you set Progressive Scan to

 

ON in error, you must reset your

 

recorder. First, remove the disc in your

 

recorder. Next, press STOP (

 

) and

 

 

 

hold it for five seconds before

 

releasing

 

it. The video output will be restored to

 

the standard setting, and a picture will

 

once again be visible on a conventional

 

analog TV or monitor.

 

Power Save Mode–You can set Power Save

 

Mode to ON to enable an economic power

 

save mode.

 

Factory Set–You can reset your recorder to

 

original factory settings.

 

 

 

 

Language

Display Menu–You can select a language for

Settings

the setup menu and information display.

 

Disc Menu–You can select a language for the

 

DVD menu.

 

Disc Audio–You can select a language for the

 

DVD audio.

 

Disc Subtitle–You can select a language for

 

the DVD subtitle.

 

 

 

 

Audio

Dolby Digital/DTS/MPEG–You can select

Settings

Bitstream (if you connect to equipment with

 

Dolby Digital, DTS, or MPEG decoder), or PCM

 

(to automatically downmix to two-channel

 

PCM audio).

 

Sampling Freq.–You can select 96 kHz or

 

48 kHz (if your receiver or amplifier is not

 

capable of decoding 96 kHz signals).

 

DRC (Dynamic Range Control)–You can set

 

the DRC to On if you want to listen to a movie

 

at a lower volume, without losing clarity.

 

 

 

 

www.insignia-products.com

11