11
Insignia 24" LCD TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an AV cable (not provided) to the
AVI N VIDE O jack and L/RAUDIO jacks on the
back of your TV and to the composite video and
audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
5Go through the Setup Wizard on page 19.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
5Go through the Setup Wizard on page19.
Note
•The AVI N VIDEO jack shares the AV IN
L/RAUDIO jacks with the COMPONENT IN
video jacks.
• When you connect the audio using the AV IN
L/RAUDIO jacks, the audio output is analog.
PC / DVI
AUDIO IN
DIGITAL
OUTPUT YP
BPRVIDEO
COMPONENT IN AV IN
L -AUDIO - R AN
T
Cable or satellite box
AV cabl e
Cables are often color-coded
to match color-coded jac ks.
Back of TV Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
D
IGITAL
O
UTPUT YP
BPRVIDEO
COMPONENT IN AV IN
L -AUDIO - R ANT / CABLE
Cable or satellite box
Coaxial cable
Back of TV