41
Insignia 24" LCD TV
www.insigniaproducts.com
4Press S or T to highlight Settings, then press
ENTER. The Photos-Settings menu opens.
5Press S or T to highlight an option, then press
ENTER. You can select:
•Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
•Shuffle—Displays the slideshow photos in
random order. You can select On or Off.
•Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 4Sec, 6Sec, or
8Sec.
•Transi tion—Sele cts the way photos transition
when moving to the next file in the slides how.
You can select:
•None—No transition effect.
•Fade to Black—Fades the screen to black
between photos.
•Vertical Wipe—Wipes the screen from left
to right between photos.
•Horizontal Wipe—Wipes the screen from
top to bottom between photos.
•Random—Randomly selects a transition
effect.
6Press EXIT to close the menu.
Maintaining
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5°to 40 °C).
• Do not place your T V in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If t he
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Troubleshooting
Video and audio
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
Photo- Settings
Repeat
Shuffle
Speed
Transition
Off
Off
4 sec
None
Repeat the slideshow when it reaches the end
PICTURE
CHANNELS
SETTINGS
PHOTOS
AUDIO
Warning
Do not try to repair your TV yourself. Contact
authorized service personnel.
Problem Solution
Picture does not fill the
screen. There are black bars
around the picture.
• Change the aspect ratio. An increasing amount
of digital TV and movies are presented in wide
screen (16:9). See “Aspect ratio options” on
page23.
No picture (screen is not lit)
and no sound. • Press on the TV or the remote control.
• Make sure that the Audio Only option is set to
Off. See “Playing TV audio only” on page25.
• Make sure that the video cables are connected
securely to your TV.
• Adjust the contrast and brightness. See
“Adjusting the TV picture” on page22.
• Make sure that the power cord is plugged in.
• Make sure that the correct video input source is
selected. See “Selecting the video input source”
on page20.
• Try another channel. The station may be
experiencing problems.
• Make sure that the incoming signal is
compatible.
• Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page9
or “Connecting an antenna or cable TV (no box)”
on page12.
• Check the closed caption settings. Some TEXT
modes can block the screen.
Dark, poor, or no picture
(screen is lit), but sound is
good.
• Try another channel. The station may be
experiencing problems.
• Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on page9
or “Connecting an antenna or cable TV (no box)”
on page12.
• Adjust the brightness. See “Adjusting the TV
picture” on page22.
• Make sure that the correct picture mode is
selected. See “Adjusting the TV picture” on
page22.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page28.
• If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
• Make sure that the video cables are connected
securely to your TV.
• The video cable(s) you are using may be bad. Try
a new set.
• Try another channel. The station may be
experiencing problems.