9
Insignia 24" LCD TV/DVD Combo
www.insigniaproducts.com
Connecting power
To connect the power:
• Plug the AC power cord into a power outlet.
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than
one connection type. To get the best video, you
should use the best connection type available. For
more information, see “What connection should I
use?” on page8.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1Make sure that your TV/DVD combo’s power
cord is unplugged, and all connected
equipment is turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an HDMI cable (not p rovided) to o ne of
the HDMI jacks on the back of your TV/DVD
combo and to the HDMI OUT jack on the cable
or satellite box.
4Plug your TV/DVD combo’s power cord into a
power outlet, turn on your TV/DVD combo, then
turn on the cable or satellite box.
5Go through the Setup Wizard on page19.
Cautions
• Your TV/DVD combo should only be operated
from the power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV/DVD combo for an extended period of time.
Note
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
USB HDMI 1 HDMI 2 / DVI VGA
PC / DVI
AUDIO IN
DIGITAL
OUTPUT Y
C
O
HDMI cable
Cable or satellite box
Back of TV/DVD combo
NS-24LD100A13_12-0375_MAN_V1_ENG.book Page 9 Wednesday, September 19, 2012 12:46 PM