Insignia NS-24LD100A13

NS-24LD100A13 Insignia 24" LCD TV/DVD Combo

www.insigniaproducts.com

B. If you select Cable, a message asks if you have

a cable box.

• Select No if no cable box is connected.

Your TV scans for available channels. The

scan may take several minutes.

• Select Yes if a cable box is connected. A

message asks how you connected the

cable box to your TV.

• Selec t AV, Component, or HDMI if you

connected a cable box to your TV usi ng

one of these cables. Read the message,

then press OK to close the wizard.

• Selec t Coaxial if you connected a cable

box to your TV using a coaxial cable.

Read the message, then press OK to

start the channel scan (VHF channels

only).

C. If you select Satellite Box, a message asks

how you connected the satellite box to your

TV.

• Select AV, Component, or HDMI if you

connected a satellite box to your TV using

one of these cables. Read the message,

then press OK to close the wizard.

• Select Coaxial if you connected a satellite

box to your TV using a coaxial cable. Read

the message, then press OK to start the

channel scan (VHF channels only).

12 To watch TV, press INPUT, press  or  to

highlight the video input source for your

TV/DVD combo in the INPUT SOURCE list, then

press OK.

• If your TV/DVD combo is connected to an

antenna, cable TV (no box), or cable or satellite

TV box using a coaxial cable, select TV.

• If your TV/DVD combo is connected to a cable

or satellite box using an HDMI cable or HDMI

cable with a DVI adapter, select HDMI1 or

HDMI2.

• If your TV/DVD combo is connected to a cable

or satellite box using a component video

cable, select Component.

• If your TV/DVD combo is connected to a cable

or satellite box using a composite video cable,

select AV.

Understanding the basics

Turning your TV/DVD combo on or off

To turn your TV/DVD combo on or off:

1Make sure that the power cord is connected to a

power outlet.

2Press (power) to turn on your TV/DVD combo.

The power indicator turns blue.

3Press (power) again to turn off your TV/DVD

combo. Your TV/DVD combo enters standby

mode, and the power indicator LED turns red.

Selecting the video input source

To select the video input source:

1Turn on your TV/DVD combo, then press INPUT.

The INPUT SOURCE list opens.

2Press  or  to select a video input source, then

press OK.

Do you have a Cable Box?

Yes

Move

ENTER

MENU EXIT

Exit

Select

How did you connect the

AV, Component, or HDMI

Coaxial

Move

ENTER

MENU EXIT

Exit

Select

cable box to the TV?

How did you connect the

AV, Component, or HDMI

Coaxial

Move

ENTER

MENU EXIT

Exit

Select

satellite box to the TV?

Note

You can pre ss EXIT to stop the auto channel search,

but you will need to run the auto channel search

again to create a channel list.

Warning

When your TV/DVD combo is in standby mode, it is

still receiving power. To completely disconnect

power, unplug the power cord.

Note

If your TV/DVD combo does not receive an input

signal for several minutes, it automatically goes into

standby mode.

HDMI 1

DVD

HDMI 2

USB

INPUT SOURCE

Component

VGA

NS-24LD100A13_12-0375_MAN_V1_ENG.book Page 20 Wednesday, September 19, 2012 12:46 PM