20
NS-26E340A13 Insignia 26" LED TV
www.insigniaproducts.com
11 Press S or T to highlight Antenna, Cable, or
Satellite Box, then press OK.
A. If you select Antenna, your TV scans for
available channels. The scan may take several
minutes.
B. If you select Cable, a message asks if you have
a cable box.
• Select No if no ca ble box is connected.
Your TV scans for available channels. The
scan may take several minutes.
• Select Ye s if a cable box is connected. A
message asks how you connected the
cable box to your TV.
• Select AV, Component, or HDMI if you
connected a cable box to your TV using
one of these cables. Read the message,
then press OK to close the wizard.
• Select Coaxi al if you connected a cable
box to your TV using a coaxial cable.
Read the message, then press OK to
start the channel scan (VHF channels
only).
C. If you select Satellite Box, a message asks
how you connected the satellite box to your
TV.
• Select AV, Component, or HDMI if you
connected a satellite box to your TV using
one of these cables. Read the message,
then press OK to close the wizard.
• Select Coax ial if you connected a satellite
box to your TV using a coaxial cable. Read
the message, then press OK to start the
channel scan (VHF channels only).
12 To watch TV, press INPUT, press S or T to
highlight the video input source for your TV in
the INPUT SOURCE list, then press OK.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your T V is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1, HDMI 2, or
HDMI3.
• If your T V is connected to a cable or satellite
box using a component video cable, select
COMP/AV.
• If your T V is connected to a cable or satellite
box using a composite video cable, select
COMP/AV.
Do you have a Cable Box?
No
Yes
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
cable box to the TV?
Note
You can pre ss EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
satellite box to the TV?