10
NS-32D120A13 Insignia 32" 720p LED TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4Connect the other end of the cable to the
HDMI1/DVI jac k on the back of your TV.
5Connect a 3.5mm audio cable (not provided) to
the AUDIO jack on the back of your TV and to
the AUDIO OUT jacks on the cable or satellite
box.
6Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7Go through the Setup Wizard on page 19.
Using component video (better)
To connect a cable or satellite box using
component video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a component video cable (not
provided) to the COMPON ENT IN Y, PB, and PR
video jacks on the back of your TV and the
component video out jacks on the cable or
satellite box.
4Connect an audio cable (not provided) to the
L/RAUDIO jacks on the back of your TV and to
the audio out jacks on the cable or satellite TV
box.
5Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6Go through the Setup Wizard on page19.
Note
You must use the HDMI1/DVI jack to connect a
cable or satellite box using DVI. If you use another
HDMI jack, you will not hear sound from the TV
speakers.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
Cable or satellite box
HDMI cable
with HDMI-DVI
adapter
3.5mm audio
cable
Back of TV
Note
•The L/R AUDIO jacks provide the audio
connection for a component video device
connected to the COMPONENT IN Y, PB, and PR
video jacks or for a composite video device
connected to the AVI N VIDEO jack.
• When you connect the audio using the L/R
AUDIO jacks, the audio output is analog.
Audio cable
Cable or satellite box
Cables are often color-coded to
match color-coded jacks.
Component video cable
Back of TV