Insignia NS-4111B, NS-4111G, NS-4111TU, NS-B4111TA manual

Read these instructions carefully before using this product, and retain them in a safe place for reference.

Quick Installation Guide

NS-B4111/NS-B4111TA/NS-4111B/NS-4111G/NS-4111TU CD Boombox

Front Using your CD player

Features

Top

1	Handle	5	Function (RADIO/CD/AUX)
2	CD door	6	Power (ON/OFF)
3	Volume control	7	Tuning control
4	FM antenna	8	CD door open (push tab)

Back

1.5V x 8 UM 2 or
	+	-	+	-
“C” size or LR14
	-	+	-	+
	+	-	+	-
	-	+	-	+

1AUX IN jack

2Battery compartment

3Headphone jack

4AC input

1	Speaker	8	Speaker
2	Light button	9	CD skip down
3	AM/FM button	10	CD skip up
4	Random button	11	CD search down button
5	CD track display	12	CD search up button
6	Repeat button	13	CD play/pause button
7	CD stop

Setting up your CD player

Connecting AC power

1Connect the provided AC power cord to the AC input socket on the CD player.

2Plug the cord into a household AC power socket.

Installing batteries

1Insert eight C alkaline batteries (not included) into the battery compartment as indicated by the diagram within the compartment.

2Securely close the battery compartment cover.

Notes: Battery power is used only when AC power is disconnected.

Replace all batteries at the same time with the same battery type. Do not mix battery types.

When CD player is stored unused for a long time, remove the batteries to prevent damage.

Warning: Use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure.

Using the radio

1Slide the FUNCTION selector to RADIO, then press AM/FM to select AM or FM mode.

2Turn the TUNING control until you locate the station you want. If you tune to an FM station broadcasting in stereo, the stereo indicator turns on.“ST”will appear in the upper-right of the LCD screen when stereo is on.

•For optimum FM reception, make sure that the FM (telescopic) antenna is fully extended and vertical.

•For optimum AM reception, rotate the CD player to orient its built-in antenna until you get the strongest signal.

Using the CD player

The CD player can play standard audio CDs and audio CDs created on a computer’s CD-R/CD-RW drive.

1Slide the FUNCTION selector to CD, then lift the CD door and insert a CD with the label facing up. Make sure that the CD is correctly mounted on the spindle and locked in place.

2Close the CD door. After a few seconds, the display shows the total number of tracks on the CD. If the disc is not correctly inserted or defective, the display shows.

To play the CD	Press PLAY/PAUSE. The current track number is
	shown on the display.
To pause	Press PLAY/PAUSE.The play indicator flashes on the
playback	display.PressPLAY/PAUSEagaintoresumeplayback.
To stop playback	Press STOP.The display shows the total number of
	tracks on the CD.
To skip tracks	Press	or	.
To repeat the	PressREPEAT.Torepeattheentiredisc(continuous
current track	play), press REPEAT twice. To return to normal
	play, press REPEAT until“REPEAT” disappears from
	the display.
To play tracks in	PressSTOP,pressRANDOM,thenpressPLAY/PAUSE.
random order	To stop random playback, press RANDOM again.