4
NS-42E440A13 Insignia 42" 1080p LCD TV
www.insigniaproducts.com
Insignia 42" 1080p LCD TV
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-42E440A13 represents
the state of the art in LCDTV design and is designed
for reliable and trouble-free performance.
INlink
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page 39 for
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2Align the front of the stand column with the
front of the base, then insert the stand column
into the base making sure that the groove in the
stand column aligns with the ridge in the base.
Secure the stand column to the base with three
M5 x 12 mm screws (provided).
3Align the stand cover with the stand column,
then secure the stand cover to the stand column
with one M5 x 12 mm screw (provided). Make
sure that the bottom of the stand cover is flush
against the top of the stand column.
4Secure the stand cover to the TV screen using
four M5 x 12 mm screws (provided).
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2If the base is attached, remove the four screws
that secure the stand column to the screen, then
remove the column.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M5 12 mm 8
Ridge Groove
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
“Miscellaneous” on page 48.)
Back view
Stand column
Stand cover