12
NS-39E480A13/NS-42E480A13/NS-46E481A13 Insignia 39"/42"/46" 1080p LED TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an AV cable (not provided) to the
AVI N VIDE O jack and AV IN L /R audio jacks on
the side of your TV and to the composite vi deo
and audio out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the Setup Wizard on page 21.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the side of your TV and to
the coaxial out jack on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the Setup Wizard on page21.
Note
The back of your TV may vary from the illustration
based on the model of your TV.
Note
When you connect the audio using the AV IN L/R
audio jacks, the audio output is analog.
Cable or satellite box
AV cable
Cables are often color-coded
to match color-coded jacks.
Side of TV
Note
The back of your TV may vary from the illustration
based on the model of your TV.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Coaxial cable
Side of TV