5
Insignia 39"/42"/46" 1080p LED TV
www.insigniaproducts.com
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2Align the front of the stand column with the
front of the base, then insert the stand column
into the base making sure that the grooves in
the stand column align with the ridges in the
base. Secure the stand column to the base with
three M5 x 12 mm screws (provided).
3Align the stand cover with the stand column,
then secure the stand cover to the stand column
with one M5 × 12 mm screw (provided). Make
sure that the bottom of the stand cover i s flush
against the top of the stand column.
4Secure the stand cover to the TV using four M5
× 12 mm screws (provided).
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1Carefully place your TV face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2Remove the four screws that secure the stand
cover to the screen, then remove the cover.
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M5 12 mm 8
Ridge Groove
Back view
Stand column
Stand cover
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load
capacity. (See “Miscellaneous” on page 49.)
Note
If the stand and the stand column are installed, you
do not need to remove them before you remove the
stand cover.