www.insigniaproducts.com 11
NS-32E859A11/NS-42E859A11 Getting Started
Installing the stand or
wall-mount bracket
To set your TV on a cabinet or ot her flat surface, you must install
the stand.
To mount your TV on a wall or other vertical surface, you must
remove the stand.
Installing the stand
To install the stand:
1Carefully place
your TV screen
face-down on a
cushioned, clean
surface to protect
the screen from
damages and
scratches.
2Attach the stand
neck to the base
and secure it with
four
M4× L17 mm
screws (provided).
3Align the stand on
the TV base, then
insert the metal
tabs on the stand
into the designated
slots on the TV
base.
4Secure the stand
with four
M4× L17 mm
screws (provided).
Installing a wall-mount bracket
To install a wall-mount bracket:
1Carefully place your TV screen face-down on a cushioned,
clean surface to protect the screen from damages and
scratches.
2Secure the wall
mount bracket to
the TV using these
four screws or those
provided with the
bracket.
Warning
Make sure that you unplug the power cord before
you install or remove the stand.
Warning
Read these instructions ca refully before you try to
install the stand or a wall-mount bracket.
If you are not sure you can install the stand or
wall-mount bracket, consult a professional installer
or service personnel. Your warranty does not cover
damages or injuries that happen due to mishandling
or incorrect assembly.
When installing the stand or wall-mount bracket,
make sure t hat you place your T V on a s oft c ushio n or
covering to prevent scratching or damage to your
TV’s finish or screen.
Caution
Make sure that you use all the screws provided for
the stand assembly.
Model Vesa mount pattern
(H x V)
NS-32E859A11 200 x 100 mm
NS-42E859A11 200 x 200 mm
Did you know?
Init Products offer quality
stands and mounts, perfect for
your newTV.
Visit the Best Buy store nearest
you to see a wide assortment
of television accessories.