20 www.insigniaproducts.com
Getting Started NS-32E859A11/NS-42E859A11
3If you use the COMPONENT /AV-IN (Y/ PB/PR) jacks,
connect an audio cable (provided) to the Land R (audio in)
jacks on the back of your TV.
4Connect the other end of the audio cable to the audio out
jack(s) on the cable or satellite box.
Connecting an HDMI device
If your device has an HDMI connection, we recommend that
you use the HDMI connection to get the best quality possible.
To connect an HDMI device:
1Make sure that your TV’s power cord is unplugged and the
HDMI device is turned off.
2Connect an HDMI cable (not provided) to the HDMI 1,
HDMI 2, HDMI 3, or HDMI/DVI jack on the side of your TV
and to the HDMI OUT jack on the HDMI device.
To play from an HDMI device:
1Turn on your TV.
2Turn on the HDMI device, then set it to the correct output
mode. See the documentation that came with the device
for more information.
3Press INPUT to open the input source list.
4Press S or T to highlight HDMI 1, HDMI 2, HDMI 3, or
HDMI4, then press SELECT.
Note
• If the cable or satellite box does not have an
HDMI or component connection, you can
connect the cable or satellite to the composite
jacks on the back of your TV. See “Connecting a
composite video device” on page23.
• If the cable or satellite box does not have an
HDMI, component, or composite connection,
connect the box to the ANT/CABLE IN jack on
the back of your TV. See “Connecting an
antenna or cable TV without a cable box” on
page18.
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
between the inputs that have devices connected.
You can select a grayed input by pressing S or T. For
more information, see “Turning the source sensor on
or off” on page95 .
Side of TV
HDMI device