12
NS-42L260A13A Insignia 42" LCD TV
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect an AV cable (not provided) to the
COMPONENT/ AVY /VIDEO jack and Land R
audio jacks on the back of your TV and to the
composite video and audio out jacks on the
cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the Setup Wizard on page 20.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the Setup Wizard on page20.
Note
•The LandR audio jacks provide the audio
connection for a component video device
connected to the COMPONENT/AV Y/VID EO,
PB, and PR video jacks or for a composite video
device connected to the
COMPONENT/AV Y/VIDE O jack.
• When you connect the audio using the
LandRaudio jacks, the audio output is analog.
Cable or satellite box
AV cable
Cables are often color-coded to match
color-coded jacks.
Note: The yellow video connector on
the AV cable connects to the green
COMPONENT/AV Y/VIDE O jack.
Back of TV
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Coaxial cable
Back of TV