Insignia NS-42L780A12, NS-46L780A12, NS-55L780A12

NS-42L780A12/NS-46L780A12/NS-55L780A12 Insignia 42"/46"/55" LCD HDTV, 1080p

www.insigniaproducts.com

During auto channel search, your TV searches

for digital channels first. When the digital

channel search is complete, a message appears

asking if you want to search for analog channels.

Select Yes to co ntinue searching for analog

channels, or select No to stop searching for

channels.

12 To watch TV, press INPUT, press S or T to

highlight the video input source for your TV in

the Input Source list, then press ENTER.

• If your TV is connected to an antenna, cable T V

(no box), or cable or satellite TV box using a

coaxial cable, select TV.

• I f your TV is connected to a c able or satellite

box using an HDMI cable or HDMI cable with a

DVI adapter, select HDMI, HDMI2, or HDMI3.

• I f your TV is connected to a c able or satellite

box using a component video cable, select

Component.

• I f your TV is connected to a c able or satellite

box using a composite video cable, select AV.

Understanding the basics

Turning your TV on or off

To turn your TV on or off:

1Make sure that the power cord is connected to

your TV and to a power outlet.

2Press (power) to turn on your TV. The power

indicator LED turns blue.

3Press (power) again to turn off your TV. Your

TV enters Standby mode and the power

indicator LED turns red.

Selecting the video input source

To select the video input source:

1Turn on your TV, then press INPUT. The Input

Source list opens.

2Press S or T to highlight a video input source,

then press ENTER.

You can also press a Quick Launch input button to

select the video input source.

• Press TV to select TV.

• Press COM P or VIDEO to select Component/AV

•Press HDMI once to select HDMI 1. Press twice to

select HDMI 2. Press three times to select HDMI 3.

Note

You can press EXIT to stop the auto channel search,

but you will need to run the auto channel search

again to create a channel list.

Note

If the Input Sensor feature is turned on (default

setting), the device connected to the video jack must

be turned on to select it in the Input Source list.

For more information, see “Turning Input Sensor on

or off” on page40.

VGA

HDMI 1

HDMI 2

USB

Input Source

Component/AV

HDMI 3