Insignia NS-46E790A12 - page 16

12
NS-46E790A12 Insignia 46" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Using composite video (good)
To connect a cable or satellite box using
composite video:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3Connect an A/V cable (not included) to the
Y-VIDE O and L/R (audio in) jacks on the side of
your TV and to the composite video and audio
out jacks on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the setup wizard on page 20.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3Connect a coaxial cable (not included) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
4Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
5Go through the setup wizard on page 20.
Side of TV
Cable or satellite box
A/V cable
Cables are often color-coded
to match color-coded jacks.
Note: The yellow connector
on the AV cable plugs into the
green Y-VIDEO jack.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
AUDIO OUTDIGITAL
OUTPUT ANT /CABLE VGA PC / DVI
AUDIO IN HDMI 1 / DVI HDMI 2
(ARC)
AU
DI
O
OUT
DI
G
ITA
L
OU
TP
UT
V
GA
P
C
/
DVI
AU
DI
O
IN HDMI 1
/
DVI HDMI 2
(AR
C)
Cable or satellite box
Back of TV
Coaxial cable