Insignia NS-46E790A12 - page 34

30
NS-46E790A12 Insignia 46" LED-LCD HDTV, 1080p
www.insigniaproducts.com
Adding or changing a channel label
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
To add or change a channel label:
1Press MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3Press S or T to highlight Channel Labels, then
press ENTER. The CHANNELS-Channel Labels
screen opens with the channel number field
highlighted.
4Press S or T to select the channel you want to
label, then press X to move to the channel label
field.
5Press W or X to highlight a character position,
then press S or T to change the character. If
you want to enter a space, select the blank.
Repeat this step to enter additional characters.
You can enter as many as 11 characters.
6When you have completed the label, press
ENTER.
7When a message appears, press W or X to select
Yes (saves the label) or No (does not save the
label), then press ENTER.
8Press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
To check the digital signal strength:
1Press MENU. The on-screen menu opens.
2Press W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELSSETTINGS USB
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Energy Savings
48
50
60
0
+10
MOVE EXIT
PREVIOUS
SELECT
Adjust settings to affect picture quality
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS USB
Off
Channels
MOVE EXIT
PREVIOUS
SELECT
Channel Strength
Audio Only
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Create labels for channels, up to 11 characters
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS USB
Channels
Channel Labels
2-0
Create labels for channels, up to 11 characters
MOVE EXIT
PREVIOUS
SELECT
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS USB
Channels
Channel Labels
2-0 A
MOVE EXIT
PREVIOUS
SELECT
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS USB
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Energy Savings
48
50
60
0
+10
MOVE EXIT
PREVIOUS
SELECT
Adjust settings to affect picture quality
MOVE EXIT
PREVIOUS
SELECT
PICTURE AUDIO CHANNELS SETTINGS USB
OK
ENTER
MENU EXIT
Off
Channels
Channel Strength
Audio Only
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Display signal strength of selected digital channels