22
NS-50L260A13 Insignia 50" LCD TV
www.insigniaproducts.com
11 Press S or T to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
AIf you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
During scanning, your TV searches for
digital channels first. When the digital
channel search is complete, a message
appears asking if you want to search for
analog channels. Select Yes to continue
searching for analog channels, or select No
to stop searching for channels.
BIf you select Cable, a message asks if you
have a cable box.
• Select No, then press ENTER if no cabl e
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Ye s, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV:
• Select AV, Comp onent, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxia l, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
CIf you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
• Select AV, Comp onent, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coax ial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
AnalogChannels
DigitalChannels
Scanning for Channels
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
Channel scan may take 20+ minutes
Channel scan may take 20+ minutes
Do you have a Cable Box?
No
Yes
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
Note
You can pre ss EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Note
You can pre ss EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
cable box to the TV?
How did you connect the
AV, Component, or HDMI
Coaxial
Move
OK
ENTER
MENU EXIT
Exit
Previous
Select
satellite box to the TV?