Insignia 55"
Connecting a digital sound system
To connect a digital sound system:
1Make sure that your TV’s power cord is unplugged and the sound system is turned off.
2Connect a digital audio cable to DIGITAL AUDIO OUT jack on the side of your TV and to the digital optical audio jack on the digital sound system.
Back of TV
Turning on your TV for the first time
The first time you turn on your TV, the Setup Wizard opens. The Setup Wizard guides you through setting up basic settings including the menu language, TV signal source, and the channel list.
To set up your TV:
1Make sure that you have:
•Installed the remote control batteries. (See page 7 for details).
•Connected an antenna, cable TV, or satellite TV. (See page 9 for details.)
•Connected the power cord. (See page 9 for details.)
2Press POWER to turn on your TV. The Choose your menu Language screen opens.
Digital sound system
Connecting an analog (stereo) sound system
To connect an analog (stereo) sound system:
1Make sure that your TV’s power cord is unplugged and the sound system is turned off.
2Connect an analog audio cable to L/R OUT jacks on the side of your TV and to the L/R audio in jack on the analog sound system.
Back of TV
3Press 
or 
to highlight the language you want, then press 
. The Choose your Picture Mode screen opens.
Please choose your picture mode
Home Mode
Retail Mode
Move ENTER Select MENU Previous EXIT Exit
Reduce total power consumption.
4Press 
or 
to highlight Home Mode or Retail Mode, then press ENTER.
Home Mode reduces total power consumption.
If you selected Retail Mode, a message appears “If you select Retail Mode, then Energy saving is not realized.” Select Yes to continue, or select No to change your selection.
The Choose your TV source screen opens.
Analog sound system
www.insigniaproducts.com | 13 |