Replacing the remote control battery
To replace the remote control battery:
1Turn the remote control over.
2While pressing down on the ridged area of the battery cover, slide the battery tray out and remove the old battery.
3Place a new CR2025 (or equivalent) lithium battery in the tray, with the positive (+) side facing up.
4Slide the battery tray back into the remote control.
Troubleshooting
Problem | Solution |
|
|
The frame will not | The power adapter is not securely connected to |
turn on. | the picture frame, or the power switch is not on. |
| Check power adapter connections, then press |
| the power button. |
|
|
A memory card is | • Make sure that the memory card is one of |
inserted in the | the supported formats and that the files on |
frame, but you can’t | the card are JPG/JPEG image files. |
view your pictures. | • Turn the digital picture frame off and make |
| sure that the memory card is inserted all |
| the way into the card slot and is inserted |
| correctly, then turn it back on. After a few |
| seconds, you should see your first picture. |
| • This digital picture frame does not support |
| flash cards larger than 2 GB. |
| • Try formatting the card. |
| • Some digital cameras save images in |
| formats other than JPEG. Refer to your |
| camera’s manual for details. |
|
|