Deleting pictures
To delete pictures:1Press 
to switch to playback mode. The playback mode main menu opens.
Using camcorder features
Using the light
Your camcorder has a
1Press 
on the 
(digital light) appears on the LCD. Digital light extends the dynamic range for backlight and provides high contrast so objects will be brighter and clearer.
Notes
Using the digital light will increase the grain of your movie. This slight reduction in image quality is normal.
2Press 
or 
to highlight PICTURE, then press SET to go to picture playback mode. The most recent photo captured is displayed.
3Press 
or 
to select the picture you want to delete.
4Press 
to highlight Delete. A message appears asking to confirm the deletion.
5Press 
or 
to highlight Yes, then press SET to delete the picture.
Or,
Press 
or 
to highlight No, then press SET to cancel the deletion. (You can also press 
to cancel the deletion and close the menu.)
Notes
•If a memory card is inserted, you can delete only pictures stored on the card.
•Pictures stored on a
2Press 
again. The light changes to normal light and 
appears on the LCD and indicates that the LED light is turned on. The LED light provides additional lighting in
3Aim the lens, then press 
to start recording. Press 
again to stop recording.
4Press 
again to turn off the light.
Note
The LED light is automatically disabled when battery power is low.
Using the self-timer
When you turn on the
1Aim the lens, then press 
. 
appears on the LCD.
2Press 
. The LED light on the front of your
camcorder blinks until the shutter operates (about 10 seconds after you press 
. The speed of the blinking increases just before the picture is taken.
10 | www.insigniaproducts.com |