Insignia NS-MB5200B setup guide

PACKAGE CONTENTS

CHARGING YOUR BATTERY PACK

1 Plug the charging cable into the battery pack’s micro USB port

(input).

2 Plug the other end of the charging cable into a USB port on your

computer, vehicle charger, or wall charger (not included). The

battery pack automatically begins charging.

CHARGING YOUR DEVICE

1 Plug the USB cable into the battery pack’s USB port (output).

2 Plug the other end of the USB cable into your device, then

press Power.

Note: If your device requires a dierent connector, use the cable

that came with your device.

CHECKING YOUR BATTERY LEVEL

Note: Recharge your battery pack when the LED blinks.

• • • • 4 LEDs = 75-100% power

• • • • 3 LEDs = 50-75% power

• • • • 2 LEDs = 25-50% power

• • • • 1 LED = 0-25% power

Blinking LED = <10% power

Before using your new product,

please read these instructions to prevent any damage.

Quick Setup Guide | NS-MB5200B