Insignia NS-P10DVD11 Maintaining, Cleaning your player, Handling discs, Discs

Insignia NS-P10DVD11 10” Portable DVD Player

Problem	Solution

Disc does not play.	• Make sure that the disc is inserted with the label side
	up.
	• Make sure that the disc is compatible with your player.
	Your player can play DVDs and audio CDs.
	• Make sure the player is not in Standby Mode. If it is,
	press any key on the remote control to activate.

Play starts, then stops immediately.	• Make sure that the region code for a DVD matches the
	region code for your player. Your player’s region code is
	1. The DVD’s region code is on the DVD or the DVD
	packaging.
	• Make sure that the disc is not dirty.
	• If condensation has formed inside your player, let your
	player dry out.

Maintaining

Cleaning your player

Clean the outside of your player with a clean cloth, slightly dampened with water.

Caution

Do not use liquid cleaners or aerosol cleaners because they may damage your player.

Handling discs

Discs

•Do not touch the surface of a disc. Handle a disc by its edge.

•Do not attach paper or tape to the disc.

•Do not use irregularly shaped discs, such as heart-shaped or star-shaped discs, because they may cause your player to malfunction.

•Do not expose a disc to direct sunlight or heat sources.

•Clean a disc by wiping the disc from the center out with a cleaning cloth.

•Remove a disc from your player and store it in its case after playing.

•Some playback operations of discs may be intentionally limited by software producers. Because your player plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs.