Electrical connections
A B C
Item | Name | Function or Control |
|
|
|
A | POWER/ | • +12 Volts - Connect to positive (+) battery |
| BATTERY | terminal. |
|
| • REM - Connect to the Remote cable from the |
|
| signal source to control amplifier switching. |
|
| Applied voltage must be between 7 and |
|
| 15VDC. |
|
| • GND - Connect to good ground, such as the |
|
| car frame or grounded metal body. Keep |
|
| ground cable length as short as possible. |
|
|
|
B | FUSE | Amplifier protection fuse. Replace with the same |
|
| type and capacity. |
|
|
|
C | SPEAKER/ | Connect the speakers to these terminals. |
| BRIDGED |
|
|
|
|
Specifications
Amplifier
| RMS power @13.8VDC |
|
| Power @ 4 Ohms............................... | 200W × 2 |
| Power @ 2 Ohms............................... | 300W × 2 |
| Bridged power @ 4 Ohms ................. | 500W × 1 |
| Minimum speaker impedance.............. | 2 Ohms |
| THD distortion ....................................... | 0.08% |
| IMD distortion........................................ | 0.08% |
| Frequency response............................. | 20 Hz to 20 KHz |
| Input sensitivity..................................... | 200mV to 6V |
| Input impedance ................................... | 15K Ohms |
| 90dB | |
8 | ||