Insignia NS-PU98505, NS-PU98505-C setup guide

Thank you for purchasing this high quality Insignia USB to Ethernet

Adapter. Use this adapter to instantly connect to a 10/100 Mbps network

from the USB port on your desktop or laptop computer.

• USB to Ethernet Adapter

• Driver CD

• Quick Setup Guide

Note: The driver software must be installed before you connect the adapter. The

adapter does not need to be connected for the software to install.

To install on a Windows PC:

1 Inser t the driver CD into the optical drive on your computer. The

software should run automatically. The initial installation screen opens.

Note: If the software does not run automatically, locate and double-click

Run.exe on the driver CD.

2 Click on your operating system, then follow on-screen instructions.

Note: If the computer has Windows 8, you do not need to install the driver from

the disc. The drivers are installed automatically.

3 When the installation is complete, click Finish to restart your

computer and nish the installation.

4 Connect the USB connector on the adapter to an open USB port on

your desktop or laptop computer.

5 Connect a network cable to the Ethernet port on the adapter.

To install on a Mac:

1 Insert the driver CD into the optical drive of your computer. On the

driver CD, locate and click AX88772.dmg. Click the AX88772 icon

( ). The driver setup driver setup dialog box opens.

Quick Setup Guide I NS-PU98505/NS-PU98505-C

USB to Ethernet Adapter

Before using your new product, please read these instructions to prevent any damage.