8
Insignia NS-R2001 AM/FM Stereo Receiver
www.insigniaproducts.com
Installing batteries
To install the batteries:
1Remove the cover.
2Insert two AAA batteries into the compartment
matching the polarity indicated.
3Replace the cover.
Using the remote control
Use the remote control by pointing it towards the
receiver’s remote sensor window. Objects between
the remote control and sensor window may
prevent proper operation.
Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees of
perpendicular to the front of the receiver.
Using your receiver
Listening to audio on your receiver
To listen to audio on your receiver:
1Press the POWER ON button on the receiver.
The STANDBY indicator lights blue.
2Press the POWER ON button on the remote
control or the ON/STANDBY button on the
receiver to turn the receiver on. The Standby
indicator turns off.
3Turn on devices connected to the receiver.
4If you connected a video device, such as a DVD
or Blu-ray player:
a) Select that device's input on the TV.
b) Turn your TV speakers off if you only want
the audio to come from your receiver.
Caution
Do not use Ni-Cd rechargeable batteries in this
remote control.
Remove the batteries if they are not to be used for an
extended period of time.
Cautions
• Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
• Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
• The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a case,
change the angle of the lighting or receiver, or
operate the remote control closer to the remote
sensor window.
23" (7m)
30°30°
Tips
The following settings are stored in memory before
the receiver is turned off:
• INPUT SELECTOR settings
• Preset stations.
If the electricity fails or the AC power cord is
unplugged for more than a week, your memory is
cleared.
Tip
You can put the receiver in Standby mode by
pressing the STANDBY button on the remote control
when the receiver is on.
With the receiver in Standby mode, you can also turn
the power on by pressing an Input Selector button
on the remote control.
OR