Adapter
outlet
Power indicator
Mode
switch
Making sure your device is compatible
Warning: Failure to select the correct voltage setting could damage
your device. DO NOT use this converter with high-wattage devices, such
as hair dryers and curling irons.
1 Determine the voltage of the power outlet you want to use.
See the table on the next page for common voltages.
2 Check the voltage of the device you want to connect to the
power outlet.

Check out these important

safety instructions to keep

yourself and your devices safe.

• Read and review these instructions before using the
converter/adapter.
• Before using the converter/adapter, check the product you
intend to connect to the converter/adapter for the
manufacturer’s voltage and wattage rating, which should be
located on the product.
Caution: Adapters alone do not convert voltage. To avoid damaging
your device, select CONVERTER when necessary.
• DO NOT use this product with hair dryers, curling irons, or
other high-wattage devices.
• Do not leave the converter/adapter in the power outlet
when not in use. Do not continue to use the
converter/adapter if it is not working properly, has been
damaged, or dropped in water.
• Check your appliance label to see if it requires less than 2.5A.
• No grounding. This product is for use with unearthed or
double-insulated appliance only.
Warning: This product is intended for adult use. This product is NOT
intended for use by unsupervised children. Choose proper settings and
plug in this product before directly supervising children using devices
connected to this product.
Quick Setup GuideLow Wattage Travel Converter/Adapter | NS-TADPCON / NS-TADPCON-C
Before using your new product, please read
these instructions to prevent any damage.
Package contents
• Low wattage travel converter/adapter
• Quick Setup Guide
Features
3 Compare the power outlet voltage to your device’s voltage.
Note: The voltage of some devices will be a range. If your power
outlet voltage is in the range of your device’s voltage (for example, a
120-240V device and a 240V power outlet), use ADAPTER mode.
*Note: If the power outlet is 100V and your device is 120V, use
ADAPTER mode.
3-prong blades
Plug
selector
Flat angled and
parallel blades
Round pins
The power outlet
voltage is:
• The same as your device’s
voltage
• In the range of your
device’s voltage
• 100V and your device is
120V
• Greater than your device’s
voltage
• Less than your device’s
voltage*
Slide the mode
switch to:
ADAPTER
CONVERTER
Your device is not
compatible. Do NOT use
this converter/adapter
with your device
4 Check the wattage of your device.
If you use ADAPTER mode:
If you use CONVERTER mode:
Device wattage is:
275W max. at 100-120V
575W max. at 100-240V
576W or more
Instructions:
You can use this adapter.
See “Selecting your plug”
for further instructions.
Your device is not
compatible. Do NOT use this
adapter with your device.
Device wattage is:
0-25W
26W or more
Instructions:
You can use this converter.
See “Selecting your plug”
for further instructions.
Your device is not
compatible. Do NOT use this
converter with your device.

BE

CAREFUL!

NS-TADPCON_NS-TADPCON-C_14-0202_QSG_V1_EN.ai 1 3/13/2014 9:13:07 AMNS-TADPCON_NS-TADPCON-C_14-0202_QSG_V1_EN.ai 1 3/13/2014 9:13:07 AM