15
Insignia 32"/46" LCD TV
www.insigniaproducts.com
Connecting an antenna or cable TV (no box)
To connect an antenna or cable TV (no box):
1Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2Connect a coaxial cable to the ANT/CABLE IN
jack on th e side o f your T V and to the a ntenn a or
cable TV wall jack.
NS-32L120A13/NS-32L240A13
NS-46L240A13
3Plug your TV’s power cord into a power outlet,
then turn on your TV.
4Go through the Setup Wizard on page 26.
IN
HDMI 2
ANT/
CABLE IN
DIGITAL
OUTPUT
USB
(ARC)
HDMI 1
(DVI)
(COAXIAL)
VIDEO
AUDIO
L
R
COMPONENT
IN
PB
PR
Y
AV IN
Coaxial cable
Antenna or
cable TV (no box)
Side of TV
IN
HDMI 3
ANT/
CABLE IN
DIGITAL
OUTPUT
USB
HDMI 1
(DVI)
(COAXIAL)
VIDEO
AUDIO
L
R
COMPONENT
IN
P
B
P
R
Y
AV IN
HDMI 2
(ARC)
Side of TV
Antenna or
cable TV (no box)
Coaxial cable
Notes
Use a coaxial cable to eliminate interference and
noise from radio waves.
Do not bundle the coaxial cable with the power
cord or other cables.
If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
If the signal level for a channe l is weak, the
picture may be distorted. Adjust the antenna or
use a highly directional outdoor or set-top
antenna with a built-in amplifier.
If the picture quality is good on some channels
and poor on others, the problem may be caused
by a poor or weak signal from the broadcaster
or cable TV provider.
If you connect to cable or satellite TV without a
set-top box and experience poor picture quality,
you may need to install a set-top box to improve
signal reception and picture quality. Contact
your cable or satellite TV provider about
upgrading to a set-top box.
Many high-definition (HD) channels upscale
standard-definition (SD) content. The picture
displayed on your TV is still displayed as SD, thus
the picture quality will not be as clear or crisp as
it would be if the content was originally
recorded in HD.