11
■Rear panel
■Display
PROGRESSIVE
DVD V
CD
TITLE
CHP TRACK TOTAL REMAIN
GUI
PBC LAST
COND
D
12345
678 -0
9
=~ ! @
MONO
R
L
R
VIDEO
OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL COAXIAL
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
RS-232
AC INLET
DVD PLAYER
MODEL NO.
DPS-5.3
IR
L
3
145678 9
20
OUT
IN
1 IR IN/OUT jacks [13]
If the unit is located inside a rack or cabinet that will not allow
infrared beams to reach the IR sensor, you will need to connect a
remote sensor to IR IN input to be able to use the remote
controller. Then install the remote sensor in an unblocked location
where you can easily point the remote controller.
Also use this jack to control other components with the included
remote control.
2RS-232 port
This port is to be used in conjunction with an external controller to
control the operation of the DPS-5.3 using an external device.
3VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
4VIDEO OUTPUT S VIDEO jack [13]
If your TV or monitor has an S video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
5VIDEO OUTPUT COMPONENT jacks [13]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
6ANALOG OUTPUT jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both connections.
7DIGITAL OUTPUT OPTICAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
8DIGITAL OUTPUT COAXIAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
9z jack [14]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
0AC INLET [15]
Use to connect the power cord to the wall outlet.
1ŸD indicator
2Inserted disc indicator
3TITLE indicator
4GUI indicator
Indicates an on-screen menu operation is being performed. On-
screen menu helps you set up the player.
5PBC indicator
6CHP/TRACK indicator
7Angle icon indicator
8REPEAT indicator
9TOTAL/REMAIN indicator
0LAST indicator
-COND indicator
=PROGRESSIVE indicator
~DTS indicator
!£/8 indicator
@Multifunctional indicator
(e.g. operating status and error messages)