11
SN 29343135 DPS-7.2E
■Rear panel
■Display
TITLEGROUP CHAPTERTRACK REMAIN
LAST
COND.D.MIX
DTS
REPEAT
DVD- AUDIOVC D
D
GUI
R LFECL
RSLS
12345 67 90
!~=-
8
AC
INLET
YP
B
P
R
COMPONENT
VIDEO
S VIDEO
OPTICAL COAXIAL
REMOTE
CONTROL
DIGITAL
OUTPUT
CH 1 CH 2 FRONT SURR CENTER
SUB
WOOFER
VIDEO
OUTPUT ANALOG
OUTPUT
L
R
CH1
CH2
RS-232
DVD AUDIO/VIDEO PLAYER
MODEL NO.
DPS-7.2
1 43
256789 0
1£/8 indicator
2Inserted disc indicator
3TITLE/GROUP indicator
4Angle icon indicator
5CHAPTER/TRACK indicator
6REPEAT indicator
7REMAIN indicator
8L, C, R, LS, RS, LFE and D.MIX indicator
9LAST indicator
0COND. indicator
-ŸD indicator
=DTS indicator
~GUI indicator
!Multifunctional indicator
(e.g. operating status and error messages)
1VIDEO OUTPUT COMPONENT CH 1/CH 2 jacks [14]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
2RS-232 port
This port is to be used in conjunction with an external controller to
control the operation of the DPS-7.2 using an external device.
3VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
4VIDEO OUTPUT S VIDEO jack [14]
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
5ANALOG OUTPUT CH 1/CH 2 jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier.
6ANALOG OUTPUT FRONT/SURR/CENTER/
SUBWOOFER jacks [15]
Use to output 5.1 channel audio (analog) to the 5.1 channel
discrete inputs on an amplifier. If you are connecting to a receiver
that has both digital and analog input jacks for DVD player
connection, it may be beneficial to make both connections.
7DIGITAL OUTPUT OPTICAL jack [15]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
8DIGITAL OUTPUT COAXIAL jack [15]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
9z jack [15]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
0AC INLET [16]
Use to connect the power cord to the wall outlet.