mP4G/mP4GL Motherboard
Connecting External System Peripherals
To complete the assembly of functioning system you will need at minimum to connect the following external system components to the system housing:
•Video Display Monitor
•Keyboard
•Mouse or other Pointing Device
Connecting a Display Monitor
You can connect any display monitor supported by the AGP display card you installed in the system. This may include either a CRT or LCD monitor, depending on the card’s specifications.
Connect the display monitor cable to the appropriate display connector on the AGP card according to the instructions that come with the card and monitor.
Connecting a Keyboard & Mouse
You can use either PS/2 or USB input devices with this motherboard.
Connecting PS/2 Devices
Connect a PS/2 keyboard and mouse to the Keyboard and Mouse PS/2 ports on the rear I/O port panel. Don’t connect or disconnect a device while the system is turned on. Doing so can damage the board.
Connecting USB Devices
You can use a USB keyboard and mouse with this motherboard. They plug into two of the USB ports. The Operating System you use must support USB to use any USB devices. You can plug and unplug USB devices when the system is turned on.
5•6 | User’s Manual |