Intel® IXDP465 Development Platform—Quick Start Guide
May 2005 Intel® IXDP465 Development Platform AN

8 Order Number: 305825, Revision: 002

5.1 Emulation with the Intel® IXDP465 Development Platform

The Intel® IXDP465 Development Platform can be used for development of products using the

Intel® IXP45X and Intel® IXP46X Product Line of Network Processors. Although the IXDP465

development platform is shipped with a fully-featured Intel® IXP465 Network Processor operating

at 533 MHz, the platform can also be used to develop products that require either an Intel® IXP460

Network Processor or an Intel® IXP455 Network Processor. These processors support subsets of

the IXP465 processor’s features, therefore software can be used to disable certain features on the

IXP465 to emulate the IXP460 and IXP455 processors.

Figure 1. Photo of IXDP465 Development Platform Setup for Quick Start Operation

B4991-02
1
2
3
5
6
4
7
9
10
8
11 13 1412 15
19
18
16
17
21
20
KEY:
1. Ethernet Port 0
2. Ethernet PHY Mezz anine Card in M II-0 NPE B slot
3. Ethernet SMII 6-pack
4. MII-1 NPE C locat ion (no mezzanine card installed)
5. USB 2.0 Host Controller
6. USB 1.1 Device Controller
7. Flash Memory
8. DDRI Memory
9. UART1 Cable to PC f or WindRiver* VxWorks*
10. UART0 Cable to PC f or RedHat* RedBoot*
11. Intel® IX P465 Network Processor/DDR Module
12. Intel® IX P465 Network Processor
13. PCI Opti on Interfa ce
14. Ethernet NI C Card plugged int o P CI slot 0
15. Ethernet Cable f r om NIC to PC
16. Power Switch
17. 4-slot Host PCI backplane
18. Power Supply
19. Voltage Regulators
20. Power Supply Cable Connector
21. LCD Display