!NOTE
It is very important for installer to verify that center line of top pivot point lines up with center line of bottom pivot point before final installation. Heel edge of door must be beveled 1/8” in 2” as shown below. The bottom pivot set should be mounted first in most installations.
!NOTE
Mortise depth for pivot leafs is 1/4”.
3/4” | 15/16” | 1/8” |
19 mm* | 24 mm* | 3 mm |
|
| typ |
Frame Leaf |
| |
1/16” | These dimensions apply to industry standard | |
2 mm | ||
typ | other frame conditions, locate frame leaf of | |
| pivot identical to door leaf as shown below. | |
Bevel heel edge of door 1/8” in 2” with 3/16” rad, typ
11/16” | 7/8” |
17 mm | 22 mm |
Door Leaf
| 26672 Rev. 4 |
