Jabra BT110 ,

6 7

To Pair the Jabra BT110 with the Jabra A210

Turn on the Jabra BT110 and the Jabra A210 and place the two devices in close

proximity to each other.

Set the adapter to pairing mode to connect with the headset.Consult the adapter’s

user manual for further information.

Turning the headset on and off

If you use your Jabra BT110 with the Jabra A210 Bluetooth adapter,your headset

will not automatically turn on and off,but remain on in standby mode

Leaving the

device on will affect battery life.You can manually turn the headset on and off by

following the instructions below.

•To turn the headset on,press the answer/end button

•To turn the headset off,press and hold the answer/end button (approx.5 sec.)

Making/answering a call

•When you make a call from your mobile phone,the call will be automatically

transferred to the headset (if it is on) – you do not have to tap the answer/

end button

•You can answer a call on your headset or your mobile phone.As long as

your headset is in standby mode,the call will be transferred immediately to

the headset

IMPORTANT:Avoid using keypad tones on your mobile phone when using your

Jabra A210 Bluetooth adapter.The tones will activate the adapter and thus use the

battery power.

Your Jabra BT110 has a yellow light (LED) which provides useful information.

•When you insert or replace the battery and turn the headset on,the yellow LED

will become solid yellow.This means that the headset is in pairing mode

•When your battery is getting low,the yellow LED will flash twice every 5 seconds.

You should then replace the battery

•If you use the Jabra BT110 with the Jabra A210,the yellow LED will indicate ‘On’

by flashing every 3 seconds

The Jabra BT110 is ready to wear on the right ear.If you prefer the left,gently rotate the

MiniGel 180°.

For optimal performance,wear the Jabra BT110 and your mobile phone on the same

side of your body or within line of sight.In general,you will get better performance

when there are no obstructions between the headset and the mobile phone.

If you can hear crackling noises;

For the best audio quality,always wear your headset on the same side of the body

as your mobile phone.

If you cannot hear anything in your headset;

1. Increase the volume on the headset.

2. Ensure that the headset is paired with the phone.

3. Make sure that the phone is connecting to the headset – if it does not connect

either from the phone’s Bluetooth menu or by tapping the answer/end button,

carry out the pairing procedure.

Will the Jabra BT110 work with other Bluetooth equipment?

The Jabra BT110 is designed to work with Bluetooth mobile phones.It can also

work with other Bluetooth devices that are compliant with version 1.1 or 1.2 and

support headset and/or hands-free profile.

Will my Jabra BT110 interfere with my car’s electronics,radio,or computer?

The Jabra BT110 produces significantly less power than a typical mobile phone.It

also only emits signals that are in compliance with the international Bluetooth

standard.Therefore,you should not expect any interference with standard

consumer-grade electronics equipment.

I am experiencing pairing problems even though my phone is indicating otherwise

If you have deleted your headset pairing connection in your mobile phone,the only

way to successfully pair the Jabra BT110 with your mobile phone is to follow the

Jabra BT110 manual ,

6 7

Using your Jabra BT110 with the Jabra A210 Bluetooth adapter

LED status indicators

Troubleshooting and frequently asked questions

Choosing wearing preference