31
J-300
An optional chemical feeder is available through your
authorized Jacuzzi dealer that installs under the lter cap
(#2472-673). Always remove the chemical feeder cap and
feeder (when used) during the lter cleaning process by
turning the cap handle counterclockwise. Reinstall the cap
and feeder back onto the lter cartridge after the lter
cleaning process is complete. It is recommended that latex
gloves be used to avoid touching the chemical feeder
during the lter cleaning process.
note: When used, the chemical feeder MUST remain on the circulation
pump lter cartridge! This lter cartridge is the one with the grid across
the wall tting as shown (right).
to DeCrease risk oF Death, Drowning or entraPMent,
alwaYs Turn power To spa oFF BeFore CleanInG THe
FIlTer CarTrIDGes!
note: Refer to steps A-J on following page for complete lter cleaning/
replacement instructions.
a DanGer: Turn power To spa oFF! To DeCrease
risk oF Death, Drowning, or entraPMent, never
operaTe spa wHen FIlTer Is noT properlY InsTalleD
or IF sKImmer assemBlY Is DamaGeD or alTereD!
B
Lift cover approx. 3/8" to
unclip, then tilt forward to
access lter cartridges.
C
(Filter Cover Back View)
Remove skimmer bag
from clips, then clean out
debris.
D
Rotate each lter
cartridge handle
counterclockwise to
unthread from mating
wall tting.