Custom Shop CSC2295H

Rear

 

 

Top/Bottom

14.88

 

28

30°

15.5

 

Sides

 

Front
Preliminary Specifications:

 

System:

 

 

Frequency Range (-10 dB):37 Hz - 20 kHz
Frequency Response (±3 dB):60 Hz - 18 kHz
Horizontal Coverage Angle (-6 dB):95° averaged 500 Hz to 16 kHz
Vertical Coverage Angle (-6 dB):70° averaged 500 Hz to 16 kHz
Directivity Factor (Q):9.0 averaged 500 Hz to 16 kHz
Directivity Index (DI):9.0 dB averaged 500 Hz to 16 kHz
Sensitivity2:95 dB SPL, 1W @ 1m (3.3 ft)
Calculated Maximum SPL2:129 dB SPL, 1W @ 1m (3.3 ft)
Nominal Impedance:8 ohms (Passive crossover mode)
Power Rating1:600 watts IEC, 2400 watts peak
Recommended Amplifier Power:800 watts
Recommended Controller: DSC260
Transducers:

 

 

Low Frequency: 2206H, 300 mm (12 in) dia., 100 mm (4 in) edge

 

 

wound ribbon voice coil

Nominal Impedance:

8 Ohms
Power Rating:600 watts AES, 2400 watts peak

Sensitivity2:

95 dB SPL, 1W @ 1m (3.3 ft)

Calculated Maximum SPL2:

129 dB SPL, 1W @ 1m (3.3 ft)

Recommended Amplifier Power:

800 watts

High Frequency:2447J; 100 mm (4”) diaphragm and voicecoil

 

 

dia., 76 mm (1.5”) throat dia.; 2332 horn

Nominal Impedance:

16 Ohms
Input Power Rating:75 W AES; 300 W Peak

Sensitivity2:

111 dB, 1 W @ 1 m (3.3’)
Calculated Maximum SPL:136 dB @ 1 m (3.3’)
Recommended Amplifier:

200 W

Physical:

 

 

Enclosure:Trapezoidal, 15o top & bottom angles, 18 mm

 

 

birch plywood
Environmental Specifications:Mil-Std 810, IPX4 per IEC 529
Suspension Attachment:12 points, accept M10 threaded hardware

 

Finish:Black DuraFlex coating

 

 

(white or custom color optional)

 

Grille:Black powder coated 18 gauge

 

 

perforated steel grille with foam backing (white or

 

 

custom color optional)
Input Connector:2 x NL4 Neutrik Speakon connector
Dimensions (H x W x D):394 mm x 711 mm x 378 mm

 

 

(15.5 in x 28 in x 14.88 in)
12” Two-Way System
Horizontal Configuration
90O x 90O Coverage Pattern
For Permanent Installation
Key Features:
42206H 12” VGC (Vented Gap CooledTM LF transducer
42332 Optimized ApertureTM HF horn with 1.5” throat
42447J 4” diaphragm, 1.5” throat compression driver
4Compact trapezoidal enclosure
4DuraFlex finish - tough, weather resistant and paintable
4Tamper resistant internal Bi- amp/Passive crossover selector

4Advanced Network Topology for smooth power response and sta- ble amplifier loading

4Versatile complement of suspen- sion points

The CSC2295H is a JBL Custom Shop produced adaptation of the Sound Power series SP212-9. The same transducers and switchable passive/active crossover network have been repackaged in a horizontal configuration enclosure. All of the features of the standard product have been maintained while adding installation flexibility.

The CSC2295H is available on a build-to-order basis. Contact the Custom Shop for information on availability and lead time.

1Rating based on test signal of IEC filtered random noise with a peak-to-average ratio of 6 dB, two hours duration.

2Sensitivity is based on a swept 500 Hz to 2.5 kHz test signal for an input of 2.83V @ 8 ohms.

JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.

2/28/01 ATR

Net Weight: 31.8 kg (70 lb)