Jenn-Air JGC8536ADB, JGC8536ADQ, JGC8536ADS, JGC8536ADW manual

www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600

		This Data Sheet Includes Information On						36"
		Jenn-Air
•		Product Model Number (s):		•
		36" Gas Cooktops:
						3 13/16"			21 9/16"
		JGC8536ADB, JGC8536ADW, JGC8536ADQ and
		JGC8536ADS			Side View (not to scale)
	•	Dimensions (Actual Size)		•			Overall Dimensions
		Overall width:	36"				Top View (not to scale)
		Overall depth:	21 9/16"

Distance from top of counter to bottom of unit: 3 13/16"

Cut-Out width: 34	7/8"			Cut-Out Dimensions
Cut-Out depth: 20	13/16"	20 13/16"
				Countertop View
Min. spacing from cooktop edge to nearest
				(not to scale)
vertical combustible wall to the RIGHT: 8"
			34 7/8"

Min. spacing from cooktop edge to nearest vertical combustible wall to the LEFT: 8"

Min. spacing from cooktop edge to nearest vertical combustible wall to the REAR: 3/4"

Minimum spacing to front edge of counter: 2"

Minimum distance between cooktop
	and cabinet directly above: 30" min					Cabinet Requirements
Minimum	width of cabinet directly above: 36"						Wall View
Maximum depth of cabinets directly							(not to scale)
	above and adjacent: 13"				36"
Minimum distance between countertop							Minimum horizontal
	and adjacent cabinet above: 18"			30" min
•	Additional Information	•					clearance between the
			18"				edge of the appliance
• Distance from top of counter to bottom of gas stub is
							and combustible
4 9/16".
							construction extending
• Distance from top of counter including manifold
							from the cooking
entrance is 7 1/2.
							surface to 18" above
• Electrical requirements : 110/120 volt AC, 60hz. Must
							the cooking surface is
be grounded. 15amp circuit required. Locate outlet
							8" (see solid areas)
below the cooktop a minimum of 5" below the
countertop if not installing over an under counter oven.
Locate outlet below the oven or in an adjacent cabinet
when installing over an adjacent under counter oven.

•Minimum clearance from top of counter to combustible material below is 4 7/16"

•Countertop must be supported within 3" of cutout.

• Unit may be installed over a Jenn-Air under counter		1 3/4" to centerline of pipe from		Top view of cutout
oven.					(not to scale)
		back edge of cutout
See page 2 for additional information		Gas inlet location
		1 3/4" from left side
		of cutout to
		centerline of pipe.
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of deter-
mining actual damages, liability of Dimension Express shall		Cooktop supplied with 1/2" NPT female inlet on regulator
not exceed $50.00.
Copyright © Dimension Express, 2003.	321
• NEVER reuse Data Sheets. Data Sheets are subject to change without		• Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily,		• Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data		• Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks			BN182.34 • A321B149 • • 031111 • 115727 • 89750
associated with reusing old Data Sheets.