3Press SET.
DIGITAL IN 1
R
DIGITAL IN 1 :2DVR/DVD3
The current setting of the selected item appears.
23:OPERATE 
:BACK
The selected submenu appears.
4To select the appropriate setting, press 2 or 3 repeatedly, then press SET.
DIGITAL IN 1
R
The
•On the front panel, turn MULTI JOG, then press SET.
DIGITAL IN 1 :2DVR/DVD3
DVR/DVD 
VIDEO
TV 
VCR 
5Repeat steps 2 to 4 to set other items if necessary.
NOTE
To exit from menu operations, press EXIT on the remote control. On the front panel, press SETTING.
Setting the items
When performing the basic settings viewing the indications on the display, the indications are slightly different from what is shown on the
This is because of the limited number of characters shown on the display. Ex.: • “SUBWOOFER: YES” is shown as “SUBWFR <YES>” on the display.
• “CROSSOVER: 100Hz” is shown as “CROSS <100Hz>” on the display.
Setting the speakers
To obtain the best possible surround effect from the Surround and DSP modes, register the setting about the speaker after all connections are completed.
7Setting subwoofer information—SUBWOOFER
Select whether you have connected a subwoofer or not.
SUBWOOFER: YES Select when you have connected a
subwoofer.
The subwoofer indicator ( S.WFR ) lights up on the display. You can adjust the subwoofer output level (see page 37).
SUBWOOFER: NO Select when you have disconnected a subwoofer. Selecting this changes the front speaker size to “LARGE” (see the right column).
7Setting the speaker
Register the sizes of all the connected speakers.
LARGE | Select when the cone speaker size is larger |
| than 12 cm. |
|
|
SMALL | Select when the cone speaker size is smaller |
| than 12 cm. |
|
|
NO | Select when you have disconnected a speaker. |
| (Not selectable for the front speakers.) |
|
|
Initial setting: LARGE (for the front speakers)
SMALL (for other speakers)
Initial setting: SUBWOOFER: NO
28
