6C O N N E C T I O N S

#1

#2

CABLE & VCR CONNECTIONS
T h e re are two basic types of antenna or cable hookups. If you have an antenna, or have a cable TV
system that does not re q u i re you to use a cable box to tune channels, use D i ag r a m# 1 .If you have a
cable system that re q u i res you to use a cable box to access all channels, use D i agram #2.If you have
a cable system that re q u i r es you to use a cable box to access certain premium channels, but not
regular basic channels, use D i agram #3 .
N OT E : To get stereo sound from a hi-fis t e reo VCR, you must connect it to the TVwith Audio/Video cables. Also,t o
get the best picture quality from any VCR use Audio/Video cables. (Use them! You’ll be glad you did.)
1) Connect cable or antenna RF wireoutfrom the wall, in to the splitter RF input.
2) Connect RF wire Out from the splitter RF output, in to the VCR RF input.
3) Connect RF wire Out from the splitter RF output, in to the TV VHF/UHF input.
4) Connect yellow video cable out from the VCR Video output, in to the TV Video input jack.
5) Connect white audio cable out from the VCR Left Audio output, in to the TV Left Audio input jack.
6) Connect red audio cable o u tf rom the VCR RightAudio output, i nto the TV Right Audio input jack.
❒If your VCR is mono it has only one audio out jack, connect it to TV L/Mono input.
1) Connect the cable RF wireoutfrom the wall, in to the cable box input.
2) Connect RF wire Out from the cable box RF output, in to the VCR RF input.
3) Connect RF wire O u tf rom the VCR RF output, i nto the TV VHF/UHF input.
4) Connect yellow video cable out from the VCR Video output, in to the TV Video input jack.
5) Connect white audio cable out from the VCR Left audio output, in to the TV Left Audio input jack.
6) Connect red audio cable o u tf rom the VCR Right Audio output, i nto the TV Right Audio input jack.
❒If your VCR is mono it has only one audio out jack, connect it to TV L/Mono input.